Hose & Pipe

Aluminum pipe tube has been used in the irrigation industry for over fifty years. Its low density, good strength, and corrosion resistance make it an excellent choice for a variety of tube and joint applications.

The aluminum tube irrigation pipe available at our Auburn location is ideally suited for use with all types of irrigation systems, including center pivots, big guns and traveler systems, hand move and mechanical moves.

Providing you with the widest range of high-pressure mainline irrigation pipe sizes available from any manufacturer.
2″, 3″, 4″, 6″, 8″, and 10″ Pipe Sizes

• A heavier coupler casting for maximum strength, especially in the weld area.
• Equipped with pressure seal gaskets.

For construction pumps, septic tank and marine pump-out service, mining and quarry use. PVC is resistant to some chemicals, acids, and alkalis. The hose is sold by the foot.

Tube:Smooth clear PVC
Reinforcement: White PVC helix
Cover: Clear PVC with excellent weather and abrasion resistance
Temperature Range: -20°C to +65°C (-4°F to +150°F)

Heavy-duty suction and discharge hose for use in irrigation suction and construction pumping. The hose is sold by the foot.

Tube: Smooth clear PVC
Reinforcement: Braided synthetic yarn
Cover: External PVC helix provides abrasion resistance and easy dragging
Temperature Range: -25°C to +70°C (-13°F to +158°F)
Pressure: Up to 100 PSI depending on size

• 2″ – 6″ – 100ft cut to multiples of 10ft.
• 8″ – 25ft & 40ft no cutting.
• 10″ – 20ft no cutting.

Yellow PVC/Nitrile rubber tube and cover; polyester reinforcement provides working pressures equal to or higher than most PVC or rubber hoses. The hose is sold by the foot.

Air compressors, High-pressure liquid pumping, Bulk powder discharge (excluding cement), Irrigation, Agriculture, Watering, Dewatering, Drainage, Flotation booms, Cable covering, Industrial wash down, Limited oil and chemical applications.

• Unique woven construction: Resists kinking, stretching and twisting.
• Ribbed cover: Provides high resistance to oil, weathering, and abrasion.
• Handling: Lighter, less bulky, stores better in less space than most rubber discharge hoses.

A heavy-duty PVC water discharge hose featuring a premium quality PVC tube and cover. The hose is reinforced with two spiral plies and longitudinal synthetic cords. MSHA-accepted (Acceptance Marking No. MSHA IC-218/1) for use as a water hose in underground mining applications. Hose is sold by the foot.

• Temp Range: -5ºF to 170ºF (-20ºC to 76ºC)
• MSHA-accepted
• Premium quality tube and cover
• High working pressure
• Ozone resistant
• Coil flat for easy storage

Rivulis Pro-Flat Premium PVC lay-flat hose, tough enough to meet all your needs. The premium resin used in this hose minimizes twisting and reduces contraction/expansion. Thick wall construction and strong yarn structure enables this durable hose to withstand extremely harsh conditions. Applications include transfer lines, sub-main lines, and discharge lines.