We are fully stocked on plastic mulch....48" x 4000' 1 mil @ $120.00 per roll

Rainbird Irrigation

Rain Bird Impact Sprinklers


Rain Bird Impact Sprinkler 30H / 30WH

3/4" (19 mm) Full Circle, Brass Impact Sprinkler

Designed for general field use on hand lines, solid set, permanent set, or mechanically moved systems. May be used with plastic non-clog vanes for better range and wind resistance.

Features

-3/4" (19mm) male NPT brass inlet bearing
-Full circle operation
-Dual nozzle port for in-close and distance irrigation
-Heavy duty brass construction
-Stainless steel springs and fulcrum pin
-Brass bearing sleeve
-Back by five-year Customer Satisfaction Policy
-For use with Rain Bird SBN-3 Straight Bore Nozzle or SBN-3-V Straight Bore Nozzle with Vane; -------Spreader nozzle port uses Rain Bird LAN-1-7, LAN-1-20, or brass plug; all nozzles sold separately
-H Model ships without nozzle and without spreader nozzle, WH Model ships without nozzle with
spreader nozzle plugged

Specs

-Bearing: 3/4" Male NPT, Brass
-Trajectory Angle: 27 degrees
-Operating Range: 25-80 psi (1.7-5.5 bar)
-Flow Rate: 2.9-13.1 gpm (0.51-1.47 m3/h)
-Radius: 40-56 ft. (12.2-17.2 m)
-Nozzle Port: 1/4" Female NPT
-Spreader Nozzle Port: 1/8" Female NPT


Rain Bird Impact Sprinkler 70CH / 70CHM

1" (25 mm) Full Circle, Brass Impact Sprinkler

The 70CH is designed for general field use and for use on mechanically moved systems, especially center pivot machines. Primarily uses on Field Crops, Row Crops, Vegetables, Nurseries, Permanent Systems, Solid Systems, Portable Systems and Wheel Lines.

Features

-70CH 1" Female NPT Bearing
-70CHM has 1” Male bearing Integral Straightening Vanes
-Full circle operation
-Stainless steel springs and fulcrum pin
-Chemically resistant washers
-Dual nozzle ports
-Back by five-year Customer Satisfaction Policy
-Integral straightening vanes increase distance of throw
-For use with Rain Bird SBN-4 Straight Bore Nozzle; Spreader nozzle port uses Rain Bird LAN-1-20
and SPB-1 bushing, or brass plug; all nozzles sold separately

Specs

-Bearing: 1" Female NPT, Brass (70CH)
-Bearing: 1" Male NPT, Brass (70CHM)
-Trajectory Angle: 21 degrees
-Operating Range: 40-80 psi (2.8-5.5 bar)
-Flow Rate: 8.8-45.8 gpm (2.0-10.4 m3/h)
-Radius: 57-82 ft. (17.39-25.01 meters)
-Nozzle Port: 3/8” Female NPT
-Spreader Nozzle Port: 3/8" Female NPT (Requires Spreader Bushing to accept LAN-20 Nozzles)